The Ulike Air 10 IPL hair removal device is designed for long-term at-home hair reduction rather than instant hair removal. It works best when there is a clear contrast between darker hair and a suitable lighter skin tone. It is not recommended for very deep skin tones or white, grey, red, or light-blonde hair, and it should never be used directly over tattoos.
What Makes the Ulike Air 10 Different?
The Air 10 combines Dual Lights, Sapphire Ice Cooling, SkinSensor technology, AutoGlide, and four treatment modes. These features are designed to make regular full-body IPL treatments faster, more comfortable, and easier to maintain.
- Best fit: people who want long-term hair reduction at home.
- Less ideal fit: people expecting permanent or instant hair removal after only a few sessions.
- First thing to check: whether your skin tone and hair color are compatible with IPL.
Dual Lights for Faster Coverage
The Air 10 uses two light sources and a wider treatment window. According to Ulike, the treatment area is 18% wider than on its earlier designs, helping make larger-area treatments faster. This is especially useful on areas such as the legs, arms, chest, and back.
Sapphire Ice Cooling for Comfort
Sapphire Ice Cooling keeps the skin-contact surface cool while the device flashes. Ulike states that the Air 10 can maintain a contact temperature of around 60–65°F during treatment, helping reduce heat, discomfort, and irritation.
Cooling does not remove the need to follow the safety instructions. Stop treatment if the skin becomes unusually painful, irritated, or excessively warm.
SkinSensor for Automatic Skin-Tone Checks
In Fast, Normal, and High modes, the Air 10 SkinSensor detects skin tone and automatically adjusts treatment energy. It can also stop the device from flashing when the detected skin tone is outside the safe treatment range.
SkinSensor should not replace normal safety precautions. Do not intentionally flash over tattoos, dark moles, birthmarks, wounds, or other areas excluded by Ulike's safety guidance.
Four Modes for Different Hair Types
The Air 10 has four official treatment modes: Fast, Normal, High, and SHR. They differ in flash speed, energy, and intended use.
- Fast Mode: designed for maintenance treatments, finer hair, and quick touch-ups.
- Normal Mode: balances treatment power and flash speed for finer to normal body hair.
- High Mode: designed for thicker body hair.
- SHR Mode: the highest-intensity option for stubborn or coarse hair, including areas such as the bikini line and underarms.
AutoGlide for Larger Areas
AutoGlide provides continuous flashing without requiring a separate button press for every treatment spot. It is useful for larger areas such as the legs and arms and helps reduce the stop-and-start feeling of a full-body session.
AutoGlide is available in Fast, Normal, and High modes. It is not available in SHR Mode.
What Results Can You Expect From Ulike Air 10?
Expect progressive hair reduction rather than immediate permanent removal. With consistent use, regrowth may become slower, finer, and less dense.
Ulike states that visible results may appear in as little as two weeks. Its current product page also cites a 28-day study in which hair-density reduction reached up to about 96% under the tested conditions. Individual results can vary by hair color, skin tone, body area, treatment mode, and consistency.
Visible Changes May Begin Within Two Weeks
Some users may begin noticing slower or finer regrowth after about two weeks of consistent treatment. This does not mean all hair will disappear within two weeks.
Hair Density Can Decrease With Regular Use
Continued treatment can reduce the amount of visible regrowth over time. The effect is usually easier to track by comparing how frequently you need to shave and how dense the returning hair appears.
Regrowth May Become Finer Over Time
Hair that returns may become softer, finer, and less noticeable with continued IPL use. Maintenance sessions are normally needed to help preserve the results.
How to Use the Ulike Air 10
Correct preparation, coverage, and treatment frequency are important for both results and safety. Follow the current Ulike instructions for your specific device rather than increasing the number of flashes on your own.
- Check that your skin tone, hair color, and treatment area are suitable for IPL.
- Shave the treatment area before using the device.
- Start with an appropriate treatment mode.
- Keep the treatment window in full contact with the skin.
- Work systematically across the area without repeatedly flashing the same spot.
- Follow Ulike's recommended treatment schedule.
Shave Before Treatment
Remove visible surface hair with a razor before treatment. Ulike advises shaving hairs longer than about 2 mm before using the Air 10.
Do not wax or epilate immediately before IPL because these methods remove hair from the follicle. IPL relies on pigment in the hair beneath the skin to absorb the light energy.
Choose the Right Mode
Choose the treatment mode according to the hair and body area rather than simply selecting the strongest setting.
- Use Fast Mode for quick treatments, maintenance, and finer hair.
- Use Normal Mode for finer to normal body hair.
- Use High Mode for thicker body hair.
- Use SHR Mode for stubborn or coarse hair where appropriate.
If you are new to IPL, follow Ulike's patch-testing and safety guidance before treating a larger area.
Keep the Treatment Window Flat on the Skin
Place the treatment window fully against the skin before flashing. Flat areas such as the legs and forearms are generally easier to cover, while curved areas such as the underarms and bikini line require more careful positioning.
Cover Each Area Evenly
Work systematically in rows or sections so that you do not accidentally leave untreated gaps. Avoid repeatedly flashing the exact same area during one treatment unless the official instructions specifically direct you to do so.
Follow the Recommended Schedule
Ulike currently recommends using its IPL devices about three times per week during the first four weeks. After the initial treatment period, maintenance can generally be reduced to about one or two sessions per month depending on regrowth.
Follow the instructions supplied with your Air 10 if they differ from general guidance on the website.
Where Can You Use the Ulike Air 10?
Ulike IPL can be used on many common body areas, including the legs, arms, underarms, bikini area, chest, back, stomach, and suitable facial areas below the cheekbones. Certain areas must still be avoided.
| Area | Typical Use | Important Precaution |
|---|---|---|
| Legs and arms | Well suited to AutoGlide and systematic coverage | Avoid repeatedly flashing the same spot |
| Underarms | Suitable for darker, coarser hair | Keep the treatment window in full contact |
| Bikini area | SHR Mode can be useful for coarse hair | Do not use directly on the genitals |
| Face | Suitable areas below the cheekbones may be treated | Never use around the eyes |
| Chest and back | Suitable for larger-area body-hair reduction | Make sure all treatment areas can be covered safely |
Legs and Arms
Legs and arms are among the easiest areas to treat because they provide relatively large, flat surfaces. AutoGlide can make treatment faster by providing continuous flashes as you move across the skin.
Underarms
Underarm hair is often darker and coarser, making it a common IPL treatment area. Ulike specifically identifies the underarms as one of the areas where SHR Mode can be useful for stubborn hair.
Clean the area first and remove deodorant or other products before treatment.
Bikini Area
The Air 10 can be used on the bikini area and surrounding external skin. Ulike also identifies the bikini line as one of the main areas for SHR Mode because the hair is often thicker and more resistant.
Do not use IPL directly on the genitals. Avoid treatment if the skin is irritated, injured, sunburned, or otherwise unsuitable according to the product instructions.
Suitable Facial Areas
Ulike guidance allows IPL on suitable facial areas below the cheekbones. These can include areas such as the upper lip, chin, and jawline when the skin tone and hair color are compatible.
Never use the device on or around the eyes. Very light or fine facial hair may also respond poorly because IPL requires enough pigment in the hair to absorb the light.
Chest and Back
The chest and back can also be treated when the skin and hair are suitable. Larger areas benefit from the Air 10's wider treatment window and AutoGlide function.
For hard-to-reach areas such as the back, make sure the treatment window maintains proper contact and that you can keep track of where the device has already flashed.
Where Should You Not Use the Ulike Air 10?
IPL is not suitable for every part of the body or every skin condition. Ulike specifically advises avoiding certain areas because IPL light is strongly absorbed by pigment.
- Do not flash directly over tattoos.
- Do not use the device on or around the eyes.
- Do not use directly on the genitals or nipples.
- Avoid open wounds, sunburned skin, scars, and other damaged or irritated areas.
- Avoid dark moles, birthmarks, and other highly pigmented spots.
- Do not use IPL when your skin tone falls outside the device's safe treatment range.
Never Flash Directly Over Tattoos
Do not use the Air 10 directly over a tattoo. IPL targets pigment, and tattoo ink can absorb the light energy, which may cause excessive heat, discomfort, skin injury, or changes to the tattoo.
Surrounding untattooed skin may be treated if it is otherwise suitable, but keep the treatment window completely away from the tattoo itself.
What Is the Ulike Air 10 Like to Use?
The Air 10 is designed around repeated at-home treatments rather than a one-time hair-removal session. A single IPL session takes longer than shaving, but regular treatment can gradually reduce how often you need to remove visible regrowth.
Ulike advertises full-body sessions of around 10 minutes when AutoGlide is used appropriately. Actual treatment time depends on the areas being treated and the treatment mode.
Ice Cooling Helps Reduce Heat on the Skin
Sapphire Ice Cooling keeps the treatment window cool before and during flashing. This can make repeated flashes feel more comfortable, particularly on sensitive areas such as the bikini line and underarms.
Cooling does not mean that discomfort should be ignored. Stop using the device if you experience excessive pain, heat, or an unusual skin reaction.
AutoGlide Speeds Up Larger Areas
AutoGlide allows continuous flashing when treating broad areas such as the legs or arms. It reduces the need to press the flash button separately for each spot and can make a full-body treatment more efficient.
AutoGlide works with Fast, Normal, and High modes but is not available in SHR Mode.
Four Modes Give More Control
The four treatment modes let you choose between speed and intensity depending on the hair being treated. Fast Mode is useful for faster maintenance and finer hair, Normal Mode covers general treatment, High Mode targets thicker hair, and SHR Mode is intended for stubborn coarse hair.
SHR Uses Four Consecutive Flashes
SHR stands for Super Hair Removal. On the Air 10, one press in SHR Mode triggers four consecutive flashes. The mode is designed to build heat progressively around the hair follicle and is intended for stubborn or coarse hair.
SHR Mode operates only with manual flashing. AutoGlide is not available in SHR Mode, and Ulike's Help Center states that the intelligent skin-tone detection function is also not active in SHR Mode. Check the treatment area carefully before using SHR and follow the official safety instructions.
Conclusion
The Ulike Air 10 is a strong at-home IPL option for people with compatible skin tones and darker hair who want long-term hair reduction. Its main advantages are Dual Lights, Sapphire Ice Cooling, SkinSensor protection in Fast, Normal, and High modes, AutoGlide for faster large-area treatment, and a dedicated SHR Mode for stubborn coarse hair.
